The Pet Article Directory

Dog Proof Fencing - Above Ground Installation

by: rayter | Total views: 22 | Word Count: 423

Most people believe that the wire use in underground fence systems should be buried “underground.” That impression is simply not true. It is still recommended, however, burying the wire so you don’t practically need to deal with it over and over again.

But for some reasons, other people are not able to do these things. And if you are one of those dealing with this dilemma that stops you from buying one containment system, here’s an interesting and truly helpful product especially created for your needs.

Containment of your dogs using the underground fence will never be a problem again just because you are renting your house, or don’t have any tools or no one will dig the ground for you.

With the wire securing staples, the hardest thing to do before will now be as easy as 1-2 steps. All you have to do is to lay the wire down and after a good rain the wire will sink and you won’t be able to see it again. Isn’t it a perfect hassle free solution to your installation difficulties?

Here are the simple steps in installing dog proof fencing for you to follow:

First lay out your boundary wire in your desired shape and around the area you want to contain. From your boundary wire run twisted wire to your transmitter and pug it in.

Once you have decide the system you chose is correct for you, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.

Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Place a "Staple" where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice).

Next, walk to the first corner of your boundary and "Staple" it to the ground. Repeat this step for all corners of your boundary. (Not all yards are square if you do not have corners on your boundary please select multiple anchor points for the wire).

Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for you and your guests.

About the Author

The author is a dog owner and writer connected to a company that offers a huge selection of effective dog proof fencing, patio pet door and other pet containment systems at lowest possible prices.

Article Source Pet Article Directory

Remember: The article body, title, author bio and links may not be changed or removed. By publishing this article, you agree to all the terms in our Terms of Service.

---

---

Rating: Not yet rated

--Choose-- 0 1 2 3 4 5

Comments

No comments posted.

Add Comment

You do not have permission to comment. If you log in, you may be able to comment.

	Enter your search terms Submit search form
	Web petarticledirectory.com